Professional's Art Supplies Store
Composi-Stone Hard Plaster - 1lb
Regular Price $33.11 Special Price $27.99
COMPOSISTONE, CEMENT FORMULATION FOR COMPOSIMOLD MOLDS
COMPOSI-STONE IS HARDER THAN PLASTER YET STILL SMOOTHER THAN CEMENT
This plaster/cement system uses a Dry mix and water at a ratio of 2.5 parts powder to 1 part water; and not less than 2 parts powder to 1 part water by weight or volume. It solidifies to a beautiful light Gray colour. The texture is similar to a cement feel, but much smoother in appearance. Composi-Stone is ideal for lawn and shelf ornaments, sculptures, craft parts, and other general applications.
Shelf Life and Storage: Composi-Stone should be stored at room temperature in a dry location. Containers must be tightly closed as a protection from moisture and foreign material.
Note: Not for sale to persons under the age of 18. By placing an order for this product, you declare that you are 18 years of age or over. This item must be used responsibly and appropriately.
Availability: In stock
Only 6 left
SKU
641061971399
DIRECTIONS FOR USE:
Mold Preparation: When using the Composi-Stone Mix in a Composi-Mold, make sure the Composi-Mold is completely cooled to room temperature or lower prior to use. Use a mold release that works with plaster or cement (Composi-Mold's Vegetable-Oil Mold Release works great).
Mixing: Measure between 2-2.5 parts dry mix to 1 part water, by volume, into a mixing container such as a plastic cup or bucket. For better accuracy, the components can be weighed. The mixing ratio, by weight, is 2 parts mix to 1 part water. Start mixing immediately and be sure to scrape the material off the sides of the mixing container. Mix until all parts are mixed up and there are little to no lumps.
Pouring: After thorough mixing, pour the mix into the Composi-Mold mold cavity. Using a ratio of 2:1 by volume will result in an easier pour, but a longer cure time. The Composi-Stone will begin to cure and solidify within 5 to 10 minutes depending on the temperature and the amount of water that was used. Wait approximately 3-4 hours before removing the part from the Composi-Mold mold. Less time may deform the part.
Cleaning: To improve clean up after using the Composi-Stone Mix, rub some Vegetable-Oil Mold Release on the mold. Tools and equipment should be scraped clean prior to the mix curing and hardening.
Safety: The powder may cause eye, skin, dermal, and respiratory sensitization. Avoid contact with skin and eyes. Use in a well ventilated area or wear a dust mask while mixing. If skin contact occurs, remove with soap and water. In case of eye contact, flush with water for 15 minutes and seek physician support. Material Safety Data Sheets (MSDS) are always available be emailing info@ComposiMold.com.
Product Safety
This product is subject to specific safety warnings
Warning: Not suitable for children under 8 years. For use under adult supervision.
| Size | 454 g |
|---|---|
| Brand | Composi-Mold |
| Country of Manufacture | United States |
| Type of Store Credit value | Select |
Write Your Own Review
